Fluke 1587 Insulation Multimeter

Specifications Voltage DC Maximum Voltage: 1000 V Accuracy: 1577: ± ( 0.2% + 2) 1587: ± ( 0.09% + 2) Maximum Resolution: 0.001V Voltage AC Maximum Voltage: 1000 V Accuracy: 1577: ± ( 2% + 3) 1587: ± ( 2% + 3) AC Bandwidth: 1587: 5kHz* * with low pass filter; 3db @ 800 Hz Maximum Resolution: 0.1 mV Current DC Maximum Amps: 400mA Amps Accuracy: 1577: ± ( 1.0% + 2) 1587: ± ( 0.2% + 2) Maximum Resolution: 0.01 mA Current AC Maximum Amps: 400mA Amps Accuracy: 1577: ± ( 2.0% + 2) * 1587: ± ( 1.5% + 2) * * 1kHz bandwidth Maximum Resolution: 0.01 mA Resistance Maximum Resistance: 50 M© Accuracy: 1577: ± ( 1.2% + 2) 1587: ± ( 0.9% + 2) Maximum Resolution: 0.1© Capacitance( 1587 only) Maximum Capacitance: 9, 999 µ F Accuracy: ± ( 1.2% + 2) Maximum Resolution: 1 nF Frequency ( 1587 only) Maximum Frequency: 100 kHz Accuracy: ± ( 0.1% + 1) Maximum Resolution: 0.01 Hz Temperature Measurement ( 1587 only) -40.0 ° C to 537 ° C -40.0 ° F to 998 ° F excluding probe Diode Test ( 1587 only) Range: 6 V Resolution: 1 mV Accuracy: ± ( 2 % + 1) Insulation Test Minimum Test Current @ 1k© / V: 1mA Test Voltages: 1577: 500, 1000 V 1587: 50, 100, 250, 500, 1000 V Maximum Resistance per Test Voltage: 50V: 100V: 250V: 500V: 1000V: 1577: 600 M© 1587: 2 G© Maximum Resolution per Test Voltage: 50V: 0.01 M© 100V: 0.01 M© 250V: 0.1 M© 500V: 0.1 M© 1000V: 0.1 M© Accuracy per Test Voltage: 50V: ± ( 3 % + 5) 100V: ± ( 3 % + 5) 250V: ± ( 1.5 % + 5) 500V: 1577: ± ( 2.0 % + 5) 1587: ± ( 1.5 % + 5) 1000V: 1577: ± ( 2.0 % + 5) 1587: ± ( 1.5 % + 5) to 600 M© , ± ( 10 % + 3) above 600 M© Environmental Specifications Operating temperature – 20 ° C to + 55 ° C Storage temperature -40° C to + 60° C Humidity ( Without Condensation) 0% - 95% ( 10 ° C – 30 ° C) 0% - 75% ( 30 ° C – 40 ° C) 0% - 40% ( 40 ° C – 55 ° C) Operating Altitude 2000 m Safety Specifications Overvoltage category Complies with ANSI/ ISA 82.02.01 ( 61010-1) 2004, CAN/ CSA-C22.2 NO. 61010-1-04, and IEC/ EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V Agency Approvals 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V Mechanical & General Specifications Size 203 x 100 x 50 mm ( with holster) Weight 624 g Warranty 3 years Battery life Alkaline Meter use: 1000 hours Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 M© with a duty cycle of 5 seconds on and 25 seconds off. IP Rating IP40